Electromagnetic weapons can be conditionally divided into those firing electromagnetic waves (radiating) and using these waves to shoot some objects. In the case of the Gauss Gun, this is a small metal projectile accelerated by the coil’s electromagnetic field. It is quite possible to make such a little thing (like a simple Tesla generator ), the only question is the selection of a known working circuit. And the easiest way is to take ready-made samples from Chinese sites, since they have already been tested and got into small-scale production (and then on to online store windows).
COLLECTION OF SCHEMES FOR EM Gun
Here are some circuit diagrams and photos carefully collected from around Ali . Based on them, you can make something similar, or even more perfect, and most importantly, having a decent finished look, since the body has always been one of the most difficult stages.
SCHEME 1
The high-voltage electromagnetic gun module according to the XKT201-05 scheme has the following features:
- Black is the power switch: Press the first button to turn on, then press to turn off, the red LED on the board is on when it is on.
- Blue is the charging switch: charge the capacitor by pressing 1~2 sec. The charging voltage per second is about 300V.
- Red – Launch Button: If the barrel is loaded with a core, press the red button to fire the projectile.
- When the device is not in use, press the power switch to turn it off.
SCHEME 2
SCHEME 3
The last 2 schemes are among the simplest and cheapest – about 1500 rubles. Multistage, with large capacitors, cost 4 times more, but about them in the second part of the article .